#KO30126 - KO PROPO RSx3-12 Servo

#Torque: 7.5Kg-cm Speed: 0.13sec/60deg(@6.0V)

#Dimensions: 33×26×15mm (Mini size)
#Weight: 26.0g
#Oprating voltage: 6.0V 
#The hard alumite aluminum gear (first gear made by plastic)
#Core-less motor
#Dual bearings
#The hard servo gear shaft
#Black cable
#Gold plated connector

#Recommended category
1/12 Racing, GTcar, F1.

This succeeds to the technology of RSx. This is the mini-size servo which fits 1/12 category most.
It uses a high-power core-less motor in luxury and secures high retentively and reliability.

The servo adopts the aluminum gear to which hardening Alumite treatment is applied.
The gear is strong in a shock and moreover shows an effect in the reproducibility of the driving.
The black wire servo leads, attractive in a chassis layout, are used.

HCS (High speed Communcation System) is the new high speed communication system between the receiver to the servo. The HCS mode shortens communication time of the signal which is compressed. HCS compatible servos is changing mode automatically by signal from receiver. So HCS compatible servos can use with all receivers. 
If you want to use servos by HCS, please use with HCS compatible receivers.

The following factory MODEL settings are pre-installed. 
You can chenge setting by Servo model selector.

Model1: Default setting(1/12 Stock class recommend)
Model2: 2014 IFMAR setting (1/12 Modi?ed class recommend,mild)
Model3: 2015JMRCA Champion(1/12 Modi?ed class recommend, Quick)
Model4: GT500, World GT, F-1 Rubber tyre class recommend
Model5: F1 form tyre, Asphalt road surface recommend

*Model1 has been selected in factory setting.

You can change servo's setting when you use our software" ICS Servo Manager".
Ex, parameter of stretch. More retentivity in High grip condition, less retentivity in Low grip situation,
You can select value by grip situation for best setting servos.