#TA47480 - TAMIYA M-08R CHASSIS KIT

Tamiya
Code: TA47480
£259.99

Full description

Description

The M-08R adds a plethora of race-spec parts to the balanced, compact RWD M-08 Concept chassis: an example being the hopped-up drivetrain with a ball differential, universal shafts featuring low-friction cross joints and lightweight aluminium swing shafts, plus 5mm wheel hubs. Turnbuckle shaft suspension arm and steering setup components simplify fine-tuning of the M-08R, and titanium-coated shafts are a durable inclusion in the kit. Carbon fibre damper stays are paired with M-Chassis big bore aluminium dampers+ featuring dedicated blue anodized top and bottom caps for a touch of class, while a 20-gram ballast weight is included to get the chassis feeling just how you want it to.


Featured Drivetrain Components:

  • Full ball bearings 
  • Ball differential (52T) 
  • 33mm lightweight aluminium swing shafts 
  • Cross joint for LF assembly type universal shafts 
  • 06 module fluorine coated 20T pinion gear 
  • M-08 Concept aluminium shafts 
  • M-Chassis reinforced freewheel axles 
  • 5mm clamp-type wheel hubs
  • Suspension 
  • Carbon fibre damper stays (front/rear) 
  • Reinforced D parts (suspension arms) 
  • Aluminium turnbuckle shafts 
  • Titanium coated suspension shafts 
  • 5x5mm, 5x11mm hard hex head ball connectors 
  • M-Chassis big bore aluminium dampers+ 
  • 3x 1.3mm-hole pistons 
  • 4mm aluminium serrated wheel nuts (blue) 
  • 5mm reinforced open face adjusters

Chassis

  • Carbon fibre battery holder 
  • Carbon fibre body mount base 
  • Reinforced K parts (gearbox) 
  • Chassis balance weight (20g) 
  • Hi-torque servo saver 
  • Aluminium ball connectors (blue) 
  • Hex head screws

Specifications

  • Length: 319mm (with 225mm wheelbase), width: 165mm 
  • Alterable wheelbase: 210mm, 225mm, 239mm 
  • Monocoque frame with separate front and rear sections 
  • Midship motor, rear-wheel drive 
  • Ball differential 
  • 3-piece steering tie-rod 
  • 4-wheel double wishbone suspension 
  • M-Chassis big bore aluminium dampers+ 
  • Gear ratio = 5.776:1 (using kit 20T pinion); 8 ratios between 6.795:1 and 4.813:1 are possible with separately sold pinions) 
  • Electronic speed controller (ESC) is sold separately.

Separately Required Items

  • Body 
  • Type 540 motor (brushless is recommended) 
  • Tyres 
  • 2-channel R/C system w/ESC 
  • R6/AA/UM3 batteries for transmitter 
  • Battery pack & charger

Specification

Brand > Models
TAMIYA, M-07 - M-08,
Model Type
Unassembled - Kit
Power Type
Electric
Surface Type
On-Road